Starting from: $539

Specifications

  • Manufacturer: Honda
  • Model: Trimmer Attachments UMC435LAC1
  • Type: Trimmers
  • Engine Type: Honda GX35, mini 4-stroke, OHC, single cylinder, air-cooled, multi-position (360°)
  • Honda Engine Model: GX35T
  • Displacement: 35.8 cc (2.18 CID)
  • Bore & Stroke: 39 x 30 mm (1.5 x 1.2 in.)
  • Maximum Net Torque: 1.6 N.m (1.20 lbf-ft.) @ 5,500 RPM
  • Idle Speed: 3,100 ± 200 RPM
  • Max. No-Load RPM: 10,000 RPM
  • Ignition System: Transistorized magneto ignition (electronic)
  • Spark Plug: CMR5H (NGK)
  • Cooling System: Forced air
  • Starting System: Recoil starter
  • Stopping System: Ignition primary circuit ground
  • Carburetor: Diaphragm type w/fuel pump
  • Recommended Fuel: Regular unleaded gasoline (86 Octane or higher)
  • Fuel Capacity: 0.63 L (22.2 fl. Imp. oz.)
  • Clutch Drive Type: Centrifugal Twin Shoe-Clutch
  • Clutch Size: 78 mm (3.0625 in.) Diameter
  • Clutch Engagement: 4;200 ± 200 RPM
  • Air Cleaner: Semi-dry type
  • Lubrication System: Oil mist
  • Oil Capacity: 100 cc (3.52 fl. Imp. oz.)
  • Recommended Oil: SAE 10W30 API service classification SJ or later
  • Overall Length (without attachment): 114.5 cm (45.1 in.)
  • Overall Width: 32.0 cm (12.6 in.)
  • Overall Height: 25.5 cm (10.0 in.)
  • Dry Weight (without attachment): 6.0 kg (13.2 lbs.)
  • Handle Type: Loop
  • Throttle Control Type: Two-motion trigger type
  • Engine Stop Switch: Slide type switch
  • Drive Shaft Type: Rigid Steel
  • Shaft Support: Rubber Mounted Bushings (4)
  • Main Pipe Diameter: 26 mm (1.02 in.)
  • Main Pipe Thickness / Material: 2 mm (0.08 in.) Aluminum
  • Shoulder Harness: Standard
  • Safety Goggles (A.N.S.I Std.): Standard
  • Blade Barrier Kit: Standard